- Rechargeable and waterproof dog training collar. Both transmitter and collar receiver can be charged at the same time, save your time.
- 1100 Yards Backlight Screen Remote Transmitter control electric dog shock collar with 3 modes: shock, vibration, sound. Includes two collars, Remote Transmitter can control up to two dogs. Lithium battery can be full of electricity for 3 hours. Full power can be used for 15 days, depending on the frequency of use.
- Fully waterproof receiver, Receiver can waterproof within 10 meters. Dog E-collar fits all dogs from 15 to 100 lbs and collar sizes range up to 28.5 inches.
- With a belt-clip on the back of the remote control for easy carrying on. Adjust the collar to fit your dog's neck. The proper tightness should be that you can insert a finger in between.
- Rechargeable and power saving design, auto sleep mode to conserve battery life. Attention: We suggest customer use low(level one) level shock on medium or large breed first; Obstacles will affect the valid distance of remote controlling.
From the Manufacturer
Get To Know Us:
We created Homdox with a single goal in mind: to start with affordable, high-quality gear and ending with a commitment to user's satisfaction. After all, we're customers too.
1. Includes two collars, Remote Transmitter can control two collars, dog training collar for 2 dogs.
2.Battery Type: Rechargeable Lithium Batteries for Collar Receiver and Remote Transmitter.
3.Water Capabilities: Waterproof Collar Receiver, Receiver can waterproof within 10 meters.
4. Range up to 1000 meters.
5.Three modes of your choice, including shock, vibration, sound.
6. Rechargeable and power saving design, both the collar and the controller have an automatic sleep mode to conserve battery life.
7. Controller Size: 10.2 x 5.7 x 2.7cm/ 3.98 x 2.22 x 1.05 inch
Belt Size: L71 x W2cm/ 27.69 x 0.78 inch
USB Cable: 101cm/ 39.39 inch
Controller: 3.7V/ 200mA Lithium Batteries
Receiver: 3.7V/ 200mA Lithium Batteries
8. Package content:
1 x Controller
2 x Receiver
2 x Plastic Belt
1 x USB Cable
1 x Power Adapter (US Plug)
1 x Test Bulb
8 x Contact Probes (4pcs Long & 4pcs Short)
1 x User Manual
a. Long press remote control power button about 3 seconds to turn on.
b.Short press the power button of two receivers to activate.
How to turn on the receiver: short press the power button on the receiver
How to turn off the receiver: long press power button about 3 seconds
c.Press mode button to select A/B mode, use ring or vibration function to distinguish which mode control one or another receiver.
d.Start to train your dog.
Receiver Volume: warning and searching your pet.
Remote Control Volume: Call your pet back.
Vibration mode: Train up your pet with different levels.
Static Shock mode: Select different levels according to the situation.
1.receiver do not work after press power button?
a. Check the power status to see whether there is the red light flash beside the receiver power button.
b.rematch: Short press the power button of the receiver to activate, press again(red light flash), then press the static shock or vibration button, it will work when red light starts to flash constantly.
2. How to set the remote control?
a.long press the mode button, start to set when hearing a beep.
b.short press the mode button to select different function, use up and down button to adjust.
c.long press to save your setting, saved when hearing a beep.
Attention: when you finish a function setting you have to set next function and press mode button, after that your first set will be saved.
3. Why does the product not work for my pet?
a.have you wear receiver correctly
The right way to wear: make sure the receiver aim at your pet throat, the best tightness is able to put in a finger. If your pet is too hairy you need to shave. Make sure the sensor part touch with skin.
b.check the remote control level was it in low level.
Remote Control: 2 hours